89
Use MIDI functionality
Transmitting/receiving bulk data (BULK)
Bulk dump allows a large amount of data to be transferred in a single operation. For example,
this can be used to store all settings of a device into a computer or sequencer.
* When you transmit or receive Bulk data, the contents of the
current memory
will be lost. Save the
current memory settings as needed before you perform this operation.
Receive mode
fig.edt2
1
Press the
[EDIT]
button.
The display will indicate “EDT”.
fig.blr
2
Press the
[BULK]
key.
The display will blink “BLR” (Bulk Receive).
fig.rs
3
Confirm what’s indicated and press the
[ENTER]
button.
isplay will indicate “RS”, and the “S” will blink.
4
Use the
[DEC]
[INC]
buttons or the
[0]
[1]
keys to select the mode.
fig.rs1
5
Confirm what’s indicated and press the
[ENTER]
button.
The third digit of the display will blink, and the PCR-1 will wait to receive bulk
data.
0
SINGLE BULK
The received data will overwrite the current memory. Memo-
ries 1–F will not be affected.
1
ALL BULK
The received data will overwrite memories 1–F.
PCR-1_e1.book 89 ページ ２００３年１１月２０日 木曜日 午後３時２２分
Summary of Contents for Edirol PCR-1
Page 98: ...98 MEMO PCR 1_e1 book 98...
