9
Names of things and what they do
Panel
1 Master volume knob
This adjusts the volume that is output from the headphone jack, the master output jacks.
* This does not effect the volume that is output from the digital output jacks.
2 SHIFT Button
Use this in conjunction with other buttons.
3 MEMORY / PGM CHANGE Button
4 MIDI CH / BANK SEL Button
5 EDIT Button
Used to assign MIDI messages to the controllers.
6 Display
Indicates the current status and various other information.
Press the[MEMORY] Button
Accesses memories that are stored within the PCR-1.
Press the
[SHIFT]
so it is lit, and
then press the
[MEMORY]
.
Transmits program change messages on the current channel.
Press the [MIDI CH] Button
Specifies the transmission channel (
“current channel”
) for the
keyboard and bender.
Press the
[SHIFT]
so it is lit, and
then press the
[MIDI CH]
.
Transmits bank select messages on the current channel.
USB
Lights if the PCR-1 is connected to your computer via USB.
DATA OUT
This will blink when MIDI messages are transmitted via USB or MIDI OUT.
HEX
Lights when the value shown in the display is hexadecimal.
fig.panel-1
1
6
2
4
3
5
PCR-1_e1.book 9 ページ ２００３年１１月２０日 木曜日 午後３時２２分
Summary of Contents for Edirol PCR-1
Page 98: ...98 MEMO PCR 1_e1 book 98...
