142
Edit mode (EDIT)
13
In the case of Advanced mode 4, specify the upper and lower limits.
14
Specify the output port. (
➔
15
If you are making an assignment for a button, specify the button mode. (
➔
Here are some examples of inputting various actual system exclusive messages.
●
GM2 System On
F0 7E 7F 09 03 F7
Here’s how to assign a GM2 System On system exclusive message in
Basic mode
.
1.
Press the
[EDIT]
button.
The display will indicate “EDT”.
2.
Slightly move the controller to which you want to assign the system exclusive
message. In the case of a button, press that button.
The display will indicate the number of the selected controller.
3.
Confirm what’s indicated, and press the
[ENTER]
button.
4.
Press the
[SYSTEM Ex.]
key.
The display will indicate “SE0”.
5.
Confirm what’s indicated, and press the
[ENTER]
button.
The display will indicate “F0”, which is the first byte (beginning status) of a system exclusive
message. This cannot be changed. (This cannot be changed.)
6.
Confirm what’s indicated, and press the
[ENTER]
button.
7.
Use the
[7]
and
[E]
keys to input the second byte “7E”.
8.
Confirm what’s indicated, and press the
[ENTER]
button.
9.
Use the
[7]
and
[F]
keys to input the third byte “7F”.
10.
Confirm what’s indicated, and press the
[ENTER]
button.
Input the fourth and fifth bytes in the same way.
11.
Finally, use the
[F]
and
[7]
keys to input the ending status byte “F7”.
12.
Confirm what’s indicated, and press the
[ENTER]
button.
13.
Specify the output port. (
➔
14.
If you are making an assignment for a button, specify the button mode.
(
➔
The GM2 System On message has now been assigned.
Summary of Contents for Edirol PCR-80
Page 124: ...124 MEMO ...
