16
The R-1’s controls and connectors
fig.panel-3
Power switch
This turns the power on/off.
Do not turn off the power during playback or recording. You must make sure that
playback or recording is stopped before you turn off the power.
• If you accidentally turn off the power during recording, the data being recorded will
not be saved to the CompactFlash card.
• The CompactFlash card may be damaged if you turn off the R-1’s power while data is
being read or written, such as during playback or recording.
• If you turn off the R-1’s power while the “Now working...” indication is shown during
effect editing or while saving a setting you’ve changed, the R-1 will become unstable,
and may become unable to start up.
Be very careful to never turn off the power when the unit is in such states.
AC adaptor jack
Connect the included AC adaptor to this jack.
HOLD switch
If you set the
HOLD switch
to the ON position, button presses on the R-1 will be
disabled; this is a convenient way to prevent the R-1 from being operated accidentally.
However, even when the
HOLD switch
is ON, the
mic type select switch
,
input
volume
,
power switch
,
and
output volume
will still be operable.
Output volume
This adjusts the volume that is sent from the
headphone/line output/digital
output jack
. However, the volume of the digital output is not adjustable.
Headphone/line output/digital output jack
This jack outputs audio from the R-1 to headphones or external speakers. If you want to
output a digital signal, use a round optical mini-type digital cable.
Eject button
Press this to eject the CompactFlash card inserted in the
memory card slot
.
Memory card slot
Insert a CompactFlash card into this slot.
CompactFlash is the only type of memory card that the R-1 can use.
1
24
25
26
23
27
28
22
22
23
24
19
20
22
25
25
26
26
27
28
28
R-1_egfis1.book 16 ページ ２００５年１１月１１日 金曜日 午後５時１３分
