32
Basic recording methods
The R-1 can use dynamic microphones and the miniature plug-in powered condenser
microphones that are designed to be connected to the recording jack of an MD (Mini
Disc) recorder or the microphone jack of a computer.
If you use a condenser microphone, you must use one that is designed for
plug-in power. If you connect the wrong type of microphone or a conventional
stereo mini-plug microphone, your equipment may be damaged.
fig.conmic-LR.eps
1
Make sure that the R-1’s power is turned off. Set the
input volume
to the
minimum position.
If anything is connected to the
line input jack
, the input from the
mic input
jack
will be ignored. If you want to record via the mic
input jack
, don’t
connect anything to the line input jack.
2
Turn on the R-1’s power as described in
“Connecting the AC adaptor and
3
Specify the type of file you want to record, as described in
(p. 28). You can use Setup mode
07 Record Mode
specify the desired setting or to check the current setting.
4
Set the
mic type select switch
appropriately for the type of microphone you’ve
connected to the
mic input jack
. ->
Recording with an external microphone
Stereo mic
MIC TYPE
INPUT LEVEL
MIC
L
R
R-1_egfis1.book 32 ページ 2005年11月11日 金曜日 午後5時13分