English
Deutsch
Français
Italiano
Español
65
Various settings
Here’s how you can restore all effect values and setup mode items of the R-1 to their
factory-set state.
1
Turn off the power of the R-1.
2
While holding down the
ENTER button
, switch on the R-1’s power.
The display will show the same content as when starting up normally, but the
settings will have been reset to their factory-set condition.
Restoring the factory settings
R-1_egfis1.book 65 ページ 2005年11月11日 金曜日 午後5時13分