Editing a Scene (Zone)
55
55
4 .
Select the desired parameter, and edit its value.
NOTE
The edited scene is temporary. It is lost if you turn off the power or
select another scene. If you want to keep the edited settings, save
the scene (p. 56).
Zone Parameter
Tab
Explanation
INT settings
(settings used when controlling the internal sound engine)
TONE
Specifies each zone’s assigned tone and output
destination.
LEVEL/PAN
Specifies each zone’s level, pan, send level, and
MIDI receive settings.
KEY RANGE
Specifies each zone’s Key Range settings.
VEL RANGE
Specifies each zone’s velocity range settings.
EQ
Specifies each zone’s equalizer (ZONE EQ) settings.
Pitch
Specifies each zone’s pitch and portamento
settings.
SCALE TUNE
Specifies each zone’s scale tune settings.
VIBRATO
Specifies each zone’s vibrato settings.
OFFSET
Specifies offset values for parameters such as cutoff
and resonance.
MONO/POLY
Specifies each zone’s mono/poly and bend
settings.
PEDAL CTRL
Specifies each zone’s connection with the pedals.
BEND CTRL
Specifies each zone’s connection with the pitch
bend lever.
S1S2 CTRL
Specifies each zone’s connection with the [S1]/[S2]
buttons.
ASSIGN KNOB
Specifies each zone’s connection with the control
knobs.
ASSIGN
SLIDER
Specifies each zone’s connection with the sliders.
VOICE
RESERVE
Specifies the number of voices reserved for each
zone.
MIDI Rx
FILTER
Specifies the types of MIDI messages received by
each zone.
EXT settings
(settings used when controlling an external sound module)
NAME
Specifies the name of the external sound module
being controlled.
OUT/PC
Specifies the channel and port for MIDI messages
sent by each zone.
LEVEL/PAN
Specifies settings for the level, pan, and send level
sent by each zone.
KEY RANGE
Specifies settings for the key range sent by each
zone.
VEL RANGE
Specifies settings for the velocity range sent by
each zone.
Pitch
Specifies pitch-related settings sent by each zone.
OFFSET
Specifies offset values for parameters such as cutoff
and resonance sent by each zone.
MONO/POLY
Specifies mono/poly and bend settings sent by
each zone.
PEDAL CTRL
Specifies pedal messages sent by each zone.
BEND CTRL
Specifies bend and wheel messages sent by each
zone.
S1S2 CTRL
Specifies [S1]/[S2] button messages sent by each
zone.
ASSIGN KNOB
Specifies control knob messages sent by each
zone.
ASSIGN
SLIDER
Specifies slider messages sent by each zone.
MEMO
¹
For details on the parameters, refer to “Parameter Guide”
(PDF).
¹
Depending on the tone, some parameters might not have
any effect even if edited.
Initializing a Zone
(UTILITY)
1 .
On the ZONE EDIT screen, touch <UTILITY>.
The UTILITY window appears.
Menu
Explanation
ZONE
INITIALIZE
Initializes the zone parameters of the current zone.
2 .
Select [E6] SELECT.
Alternatively, you can touch the menu item directly.
A confirmation message appears.
3 .
Select [E5] OK.
Initialization is executed, and you return to the ZONE EDIT
screen.
If you decide to cancel, choose [E6] CANCEL.
Checking the Output Destination for All Zones at Once
(ZONE OUT ASSIGN Screen)
This lets you check all of the output destinations at once for each
zone.
1 .
Hold down the [SHIFT] button and press the
SYNTH CTRL [FX] button.
The ZONE OUT ASSIGN screen appears.
2 .
Touch the screen to change the outputs for each
zone.
MEMO
Touch the output destinations on the left side of the screen to
switch the settings for all zones at once. This is useful when you
want to apply the IFX to all zones.
Summary of Contents for FANTOM-06
