Roland Fantom XR Owner'S Manual Download

Page: 143 / 284

143

Adding Effects

Reverb Output

fig.22-028a

Reverb Output Level

Adjusts the volume of the sound that has passed through
reverb.

Value:

0–127

Reverb Output Assign

Specifies how the sound routed through reverb will be output.

Value

Output to the OUTPUT A (MIX) jacks in stereo.

Output to the OUTPUT B jacks in stereo.

If the Mix/Parallel parameter is set to “MIX,” all sounds are
output from the OUTPUT A (MIX) jacks in stereo (p. 158).

Mastering Effect

Mastering effect settings apply to the entire Fantom-XR. These
settings are not for individual patches or performances.

For details on the Mastering Effect, refer to

“Mastering Effects”

(p.

146).

fig.22-029

MFX Control

To access the MFX Control screen

From the Effect Edit Menu screen, turn the VALUE dial or
use [INC][DEC] to select “CTRL.”

fig.22-0063

Press [ENTER].

Control 1–4 Src
(Multi-Effects Control Source 1–4)

Sets the MIDI message used to change the multi-effects parameter
with the multi-effects control.

Value

OFF:

Multi-effects control will not be used.

CC01–31, 33–95:

Controller numbers 1–31, 33–95

For more information about Control Change messages, please
refer to

“MIDI Implementation”

(p. 245).

PITCH BEND:

Pitch Bend

AFTERTOUCH:

Aftertouch

SYS CTRL1–SYS CTRL4:

MIDI messages used as common multi-
effects controls.

Fantom-XR_r_e.book 143 ページ２００６年４月４日　火曜日　午前１０時１４分

Summary of Contents for Fantom XR





























































































































































































































































































Search results

Summary of Contents for Fantom XR

Reviews:

Related manuals for Fantom XR

Brands by name

Popular brands

Roland Fantom XR, Owner'S Manual

Search results

Summary of Contents for Fantom XR

Reviews:

Related manuals for Fantom XR

Brands by name

Popular brands