background image

6

7

Create a Sound!

2

STEP

Create a Bass Sound

Let’s try playing an arpeggiated synth bass sound.
Turn the filter knob to make the sound change.

Use the [CUTOFF] Knob to Fatten the Sound!

Moving the [CUTOFF] knob will make the sound fatter or brighter. Once you’ve 

familiarized yourself with its function, try moving the [CUTOFF] knob between 

10 o’clock and one o’clock while you raise and lower the LFO [FILTER DEPTH] 

slider. It’s effective to do this in sync with the tempo.

1. 

Call up the “PRESET B-1” patch.

Press the 

[PRESET 

PATCH]

 button

Press the 

[1]

 button

Press the 

[BANK]

 button and 

then press the 

[2] (B)

 button

2. 

Press the [KEY HOLD] button so it’s blinking.

3. 

Press the second C key from the bottom.

You’ll hear an arpeggiated techno bass.

4. 

Turn the FILTER [RESONANCE] knob to the 

maximum position.

5. 

Slowly turn the FILTER [CUTOFF] knob from 

the maximum position down to the minimum.

It’s effective to make this change in sync with the tempo.

6. 

Set the [RESONANCE] knob at 10 o’clock, and 

the [CUTOFF] knob at 12 o’clock.

7. 

In sync with the tempo, raise the LFO [FILTER DEPTH] 

slider, and then bring it back to the center.

For the LFO DEPTH, the center is 0.

How Do I Stop the Sound?

Press the [KEY HOLD] button to stop the sound.

Add More Low End!

Turn on the [TONE 3] button, and play the keyboard.

Layering three tones produces an even fatter sound.

Save The Patch You’ve Created

The GAIA SH-01 has internal memory in which you can store 64 patches  

that you’ve created. 
By using USB memory (sold separately), you’ll be able to store 64 more 

patches.

To save your patch, press the 

[WRITE]

 button and then select the save-destination patch number; finally press 

the 

[WRITE]

 button once again.

Select the 

GROUP

USER PATCH  
USB MEMORY PATCH

Select a 

BANK

Press the 

[BANK]

 

and then press one  
of the 

[1]

[8]

 buttons

Select a 

NUMBER

Press one of the 

[1]

[8]

 

buttons

Press the 

[WRITE]

 button

Layer Tones to Create Fat Sounds!

The GAIA SH-01 lets you layer three tones together, 

allowing you to create incredibly fat sounds. Use the 

TONE buttons to turn each tone on/off.

A NOTE OF 

ADVICE

A NOTE OF 

ADVICE

Summary of Contents for Gaia SH-01










Reviews: