Roland GR-S, Owner'S Manual

9

Setting

About Sleep Mode

When ten hours have elapsed since the last operation 

or audio input, the GR-S will enter sleep mode (power 

conservation mode). From sleep mode, you can press 

the pedal to return to normal mode.

* 

Battery power continues to be consumed even in sleep 

mode. To prevent battery consumption, turn off the power by 

removing the plug from the OUTPUT L jack.

Disabling sleep mode

1. 

While holding down the left pedal, turn 

on the power (insert a plug into the 

OUTPUT L jack).

2. 

Continue holding down the left pedal 

for five seconds.

The POWER indicator will blink.

3. 

Release the left pedal; the GR-S will 

resume normal operation.

Enabling sleep mode (default setting)

1. 

While holding down the left pedal, turn 

on the power (insert a plug into the 

OUTPUT L jack).

2. 

Within two seconds after the POWER 

indicator lights up, step on the left pedal 

two more times.

The POWER indicator will blink.

After two seconds, the GR-S will resume normal operation; 

sleep mode will be enabled.

Restoring the Factory Settings 

(Factory Reset)

Here’s how to restore the GR-S’s settings to their 

factory-set condition.

* 

When you execute “Factory Reset,” the settings you made will 

be lost.

1. 

While holding down the [WRITE] button, 

turn on the power (insert a plug into the 

OUTPUT L jack).

All MEMORY indicators (1–4) will blink.

2. 

Press the [WRITE] button to execute 

Factory Reset.

All MEMORY indicators (1–4) will blink rapidly. When Factory 

Reset is completed, the GR-S will return to normal operation.

* 

Never turn off the power while MEMORY indicators are blinking 

rapidly.

Turning the FX On/Off

The GR-S includes spatial-type effects (FX) that 

provide a pleasant sound even when you’re not using 

any other equipment.

Here’s how to turn the FX on/off.

1. 

While holding down the right pedal, 

turn on the power (insert a plug into the 

OUTPUT L jack).

The FREEZE indicator will blink.

2. 

Press the [SELECT] button to turn the FX 

on/off.

The FX is on when the first indicator is lit,  

and off when the indicator is unlit.

3. 

Press the [WRITE] button to decide the 

setting.