manualshive.com logo in svg

Roland HandSonic HPD-15, Owner'S Manual

The Roland HandSonic HPD-15 is an innovative percussion controller that offers unlimited creative possibilities. With its intuitive interface and extensive range of sounds, this product allows musicians to express their unique style. Enhance your playing experience by downloading the free manual from 88.208.23.73:8080 to fully explore the HPD-15's capabilities.

Share
Download
background image

105

MIDI Implementation

Appendices

1-1-3 MIDI

+—————————————————————————————————————————————————————————————————+
|Offset       |           |                                       |
| address     | Size      | Description             Data (Value)  |
|—————————————+———————————+———————————————————————————————————————|
|       00 00 | 000a aaaa | Melo1 MIDI Ch           0 - 16        |
|             |           |                         (1 - 16,OFF)  |
|—————————————+———————————+———————————————————————————————————————|
|       00 01 | 000a aaaa | Melo2 MIDI Ch           0 - 16        |
|             |           |                         (1 - 16,OFF)  |
|—————————————+———————————+———————————————————————————————————————|
|       00 02 | 000a aaaa | Perc1 MIDI Ch           0 - 16        |
|             |           |                         (1 - 16,OFF)  |
|—————————————+———————————+———————————————————————————————————————|
|       00 03 | 000a aaaa | Perc2 MIDI Ch           0 - 16        |
|             |           |                         (1 - 16,OFF)  |
|—————————————+———————————+———————————————————————————————————————|
|       00 04 | 000a aaaa | Pad MIDI Ch             0 - 16        |
|             |           |                         (1 - 16,OFF)  |
|—————————————+———————————+———————————————————————————————————————|
|       00 05 | 0000 000a | Local Control           0 - 1         |
|             |           |                         (OFF,ON)      |
|—————————————+———————————+———————————————————————————————————————|
|       00 06 | 0000 000a | Soft Thru               0 - 1         |
|             |           |                         (OFF,ON)      |
+—————————————————————————————————————————————————————————————————+

1-1-4 CONTROLLER

+—————————————————————————————————————————————————————————————————+
|Offset       |           |                                       |
| address     | Size      | Description             Data (Value)  |
|—————————————+———————————+———————————————————————————————————————|
|       00 00 | 0000 00aa | Data Thin               0 - 2         |
|             |           |                         (OFF,1,2)     |
|—————————————+———————————+———————————————————————————————————————|
|       00 01 | 0000 0000 | Edge Level              0 - 15        |
|             |           |                         (1 - 16)      |
|—————————————+———————————+———————————————————————————————————————|
|       00 02 | 0000 0000 | Edge Area               0 - 15        |
|             |           |                         (1 - 16)      |
|—————————————+———————————+———————————————————————————————————————|
|       00 03 | 0000 0000 | (Reserved)                            |
|—————————————+———————————+———————————————————————————————————————|
|       00 04 | 0000 0aaa | D Beam Curve            0 - 4         |
|             |           |                         (1 - 5)       |
|—————————————+———————————+———————————————————————————————————————|
|       00 05 | 0000 aaaa | (Reserved)                            |
|—————————————+———————————+———————————————————————————————————————|
|       00 06 | 0aaa aaaa | D Beam Sense            0 - 127       |
+—————————————————————————————————————————————————————————————————+

1-1-5 PAD

+—————————————————————————————————————————————————————————————————+
|Offset       |           |                                       |
| address     | Size      | Description             Data (Value)  |
|—————————————+———————————+———————————————————————————————————————|
|          00 | 0000 aaaa | Sens                    0 - 15        |
|             |           |                         (1 - 16)      |
|—————————————+———————————+———————————————————————————————————————|
|          01 | 000a aaaa | Threshold               1 - 16        |
|—————————————+———————————+———————————————————————————————————————|
|          02 | 0aaa aaaa | Mask Time               0 - 32        |
|             |           |                  (0 - 64ms, 2ms step) |
|—————————————+———————————+———————————————————————————————————————|
|          03 | 0000 aaaa | Pressure Sens           0 - 15        |
|             |           |                         (1 - 16)      |
+—————————————————————————————————————————————————————————————————+

1-1-6-1 TRIG COMMON

+—————————————————————————————————————————————————————————————————+
|Offset       |           |                                       |
| address     | Size      | Description             Data (Value)  |
|—————————————+———————————+———————————————————————————————————————|
|       00 00 | 0000 000a | Trigger Input Mode      0 - 1         |
|             |           |                        (HD/RM,TRIGx2) |
|—————————————+———————————+———————————————————————————————————————|
|       00 01 | 0000 aaaa | Trigger Rim Sens        0 - 15        |
|             |           |                         (OFF,1 - 15)  |
+—————————————————————————————————————————————————————————————————+

1-1-6-2 TRIG

+—————————————————————————————————————————————————————————————————+
|Offset       |           |                                       |
| address     | Size      | Description             Data (Value)  |
|—————————————+———————————+———————————————————————————————————————|
|          00 | 000a aaaa | Trigger Type            0 - 19  (*2)  |
|—————————————+———————————+———————————————————————————————————————|
|          01 | 0000 aaaa | Trigger Sens            0 - 15        |
|             |           |                         (1 - 16)      |
|—————————————+———————————+———————————————————————————————————————|
|          02 | 0000 0aaa | Trigger Curve           0 - 7   (*3)  |
|—————————————+———————————+———————————————————————————————————————|
|          03 | 000a aaaa | Trigger Threshold       1 - 16        |
|—————————————+———————————+———————————————————————————————————————|
|          04 | 0000 00aa | Trigger Scan Time       0 - 2         |
|             |           |                   (1 - 3ms, 1ms step) |
|—————————————+———————————+———————————————————————————————————————|
|          05 | 0000 aaaa | Trigger Retrig Cancel   0 - 15        |
|             |           |                         (1 - 16)      |
|—————————————+———————————+———————————————————————————————————————|
|          06 | 0aaa aaaa | Trigger Mask Time       0 - 32        |
|             |           |                  (0 - 64ms, 2ms step) |
|—————————————+———————————+———————————————————————————————————————|
|          07 | 0000 aaaa | Trigger Crosstalk Rate  0 - 13  (*4)  |
+—————————————————————————————————————————————————————————————————+

(*2) PD-5, PD-7, PD-9, PD-80, PD-80R, PD-100, PD-120, P-1, P-2, KD-7, KD-80, KD-120, K-1,

K-2, KICK, SNARE, TOM, FLOOR, SW +, SW -

(*3) Linear, Exp1, Exp2, Log1, Log2, Spline, Loud1, Loud2
(*4) OFF, 20%, 25%, 30%, 35%, 40%, 45%, 50%, 55%, 60%, 65%, 70%, 75%, 80%

1-1-7 PATCH CHAIN GROUP

+—————————————————————————————————————————————————————————————————+
|Offset       |           |                                       |
| address     | Size      | Description             Data (Value)  |
|—————————————+———————————+———————————————————————————————————————|
|          00 | 0000 aaaa | Patch Number (step1)    0 - 251 (*5)  |
|#         01 | 0000 bbbb |                                       |
|—————————————+———————————+———————————————————————————————————————|
|          02 | 0000 aaaa | Patch Number (step2)    0 - 251       |
|#         03 | 0000 bbbb |                                       |
|          :  |    :      |                                       |
|          40 | 0000 aaaa | Patch Number (step33)   240 - 251     |
|#         41 | 0000 bbbb |                                       |
+—————————————————————————————————————————————————————————————————+

(*5) P0101 - U1008, JUMP TO CH01 - JUMP TO CH10, LOOP, END

1-2 USER PATCH and TEMPORARY PATCH

+—————————————————————————————————————————————————————————————————+
|Offset       |                                                   |
| address     | Description                                       |
|—————————————+———————————————————————————————————————————————————|
|       00 00 | PAD SET A                                    1-2-1|
|—————————————+———————————————————————————————————————————————————|
|       01 00 | PAD SET B                                    1-2-1|
|—————————————+———————————————————————————————————————————————————|
|       02 00 | PAD SET C                                    1-2-1|
|—————————————+———————————————————————————————————————————————————|
|       10 00 | PAD A1                                     1-2-2-1|
|—————————————+———————————————————————————————————————————————————|
|       11 00 | PAD A2                                     1-2-2-1|
|         :   |   :                                               |
|       1E 00 | PAD C5                                     1-2-2-1|
|—————————————+———————————————————————————————————————————————————|
|       1F 00 | PEDAL                                      1-2-2-2|
|—————————————+———————————————————————————————————————————————————|
|       20 00 | D BEAM                                     1-2-2-2|
|—————————————+———————————————————————————————————————————————————|
|       21 00 | RIBBON L                                   1-2-2-2|
|—————————————+———————————————————————————————————————————————————|
|       22 00 | RIBBON R                                   1-2-2-2|
|—————————————+———————————————————————————————————————————————————|
|       23 00 | TRIG 1                                     1-2-2-1|
|—————————————+———————————————————————————————————————————————————|
|       24 00 | TRIG 2                                     1-2-2-1|
|—————————————+———————————————————————————————————————————————————|
|       30 00 | EFFECT                                       1-2-3|
|—————————————+———————————————————————————————————————————————————|
|       38 00 | LFO                                          1-2-4|
|—————————————+———————————————————————————————————————————————————|
|       40 00 | COMMON                                       1-2-5|
+—————————————————————————————————————————————————————————————————+

1-2-1 PAD SET

+—————————————————————————————————————————————————————————————————+
|Offset       |           |                                       |
| address     | Size      | Description             Data (Value)  |
|—————————————+———————————+———————————————————————————————————————|
|          00 | 0000 aaaa | Inst                    0 - 98  (*6)  |
|#         01 | 0000 bbbb |                                       |
|—————————————+———————————+———————————————————————————————————————|
|          02 | 0000 aaaa | Pitch                   0 - 960       |
|#         03 | 0000 bbbb |       (-2400 - +2400cent, 5cent step) |
|#         04 | 0000 cccc |                                       |
|#         05 | 0000 dddd |                                       |
|—————————————+———————————+———————————————————————————————————————|
|          06 | 0aaa aaaa | Level                   0 - 127       |
|—————————————+———————————+———————————————————————————————————————|
|          07 | 0000 aaaa | Pan                     1 - 129 (*7)  |
|#         08 | 0000 bbbb |                                       |
|—————————————+———————————+———————————————————————————————————————|
|          09 | 00aa aaaa | Decay                   0 - 62        |
|             |           |                         (-31 - +31)   |
|—————————————+———————————+———————————————————————————————————————|
|          0A | 0aaa aaaa | ReverbSend              0 - 127       |
|—————————————+———————————+———————————————————————————————————————|
|          0B | 0000 00aa | M-FX SW                 0 - 2         |
|             |           |                      (OFF,ON,PadData) |
+—————————————————————————————————————————————————————————————————+

(*6) Conga, Latin1.....etc.
(*7) L63 - Center - R63, Random, Alternate

1-2-2-1 PAD A1 - PAD C5, TRIG 1, TRIG 2

+—————————————————————————————————————————————————————————————————+
|Offset       |           |                                       |
| address     | Size      | Description             Data (Value)  |
|—————————————+———————————+———————————————————————————————————————|
|          00 | 0000 aaaa | Inst                    0 - 600       |
|#         01 | 0000 bbbb |                                       |
|#         02 | 0000 cccc |                                       |
|#         03 | 0000 dddd |                                       |
|—————————————+———————————+———————————————————————————————————————|
|          04 | 0000 aaaa | Pitch                   0 - 4800      |
|#         05 | 0000 bbbb |       (-2400 - +2400cent, 1cent step) |
|#         06 | 0000 cccc |                                       |
|#         07 | 0000 dddd |                                       |
|—————————————+———————————+———————————————————————————————————————|
|          08 | 0aaa aaaa | Level                   0 - 127       |
|—————————————+———————————+———————————————————————————————————————|
|          09 | 0000 aaaa | Pan                     1 - 129 (*8)  |
|#         0A | 0000 bbbb |                                       |
|—————————————+———————————+———————————————————————————————————————|
|          0B | 00aa aaaa | Decay                   0 - 62        |
|             |           |                         (-31 - +31)   |
|—————————————+———————————+———————————————————————————————————————|
|          0C | 00aa aaaa | Sweep                   0 - 62        |
|             |           |                         (-31 - +31)   |
|—————————————+———————————+———————————————————————————————————————|
|          0D | 00aa aaaa | Color                   0 - 62        |
|             |           |                         (-31 - +31)   |

Summary of Contents for HandSonic HPD-15





















































































































Reviews:

No comments

Related manuals for HandSonic HPD-15

Koma Elektronik RH 301 User Manual preview
RH 301
Brand: Koma Elektronik Pages: 2
ION DISCOVER DRUMS Quick Start Manual preview
DISCOVER DRUMS
Brand: ION Pages: 16
Yamaha DD-12 Owner'S Manual preview
DD-12
Brand: Yamaha Pages: 24
Pyle PTED01 Manual preview
PTED01
Brand: Pyle Pages: 20
Pyle PED-021M User Manual preview
PED-021M
Brand: Pyle Pages: 20
Yamaha DTS70 Operation Manual preview
DTS70
Brand: Yamaha Pages: 58
Yamaha YDD65 Mode D'Emploi preview
YDD65
Brand: Yamaha Pages: 64
Clavia ddrums plus Operation Manual preview
ddrums plus
Brand: Clavia Pages: 19
Clavia Nord Drum User Manual preview
Nord Drum
Brand: Clavia Pages: 20
Clavia Nord Drum 2 User Manual preview
Nord Drum 2
Brand: Clavia Pages: 36
Clavia ddrum4 Owner'S Manual preview
ddrum4
Brand: Clavia Pages: 39

Brands by name

Popular brands

Load more brands