background image

 

7

Contents

 

Chapter 6 Connecting MIDI Devices ...................................................76

 

Using the HPD-15 to Play External Instruments ................................................................................. 76

Setting for MIDI Transmission.................................................................................................... 76
Setting the MIDI Channels........................................................................................................... 77

Using the HPD-15 As a Sound Module................................................................................................. 78

Setting the MIDI Channel for a Part........................................................................................... 78

Using with the Roland SPD-20 (SOFT THRU)..................................................................................... 79
Using a Sequencer or a Computer to Record/Play Back the Performance on the HPD-15 .......... 79

Cutting the Connection Between the Sound Generator and the Pad Controller 
(Local Control)............................................................................................................................... 80

Saving Data to an External MIDI Instrument....................................................................................... 80

Transmitting (Bulk Dump) .......................................................................................................... 80
Receiving (Bulk Load) .................................................................................................................. 81
Setting the Device ID .................................................................................................................... 82
Program Change Number List (User Patches) ......................................................................... 82

 

Troubleshooting....................................................................................83

 

Problems With the Overall Sound ......................................................................................................... 83
MIDI-related Problems ............................................................................................................................ 84
Sequencer-related Problems ................................................................................................................... 84

 

Restoring the Factory Settings............................................................85

Messages and Error Messages ...........................................................86

About MIDI .............................................................................................88

Preset Patch List...................................................................................90

Preset Pattern List ................................................................................91

Instrument List ......................................................................................92

 

Pad Set Instrument List ........................................................................................................................... 94
Backing Instrument List .......................................................................................................................... 94

 

Effect Type List .....................................................................................95

Demo Song List.....................................................................................96

MIDI Implementation.............................................................................97

Specifications......................................................................................112

Index.....................................................................................................113

Summary of Contents for HandSonic HPD-15





















































































































Reviews: