Roland HU-540, User Manual

ROLAND DG CORPORATION
1-6-4 Shinmiyakoda, Hamamatsu-shi, Shizuoka-ken, JAPAN  431-2103
MODEL NAME

: See the MODEL given on the rating plate.

RELEVANT DIRECTIVE : EC LOW VOLTAGE DIRECTIVE (73/23/EEC)

EC ELECTROMAGNETIC COMPATIBILITY DIRECTIVE (89/336/EEC)

WARNING

This is a Class A product.  In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.

For Canada

CLASS A                    NOTICE

This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.

CLASSE A                   AVIS

Cet appareil numérique de la classe A respecte toutes les
exigences du Règlement sur le matériel brouilleur du
Canada.

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO  FREQUENCY  INTERFERENCE

STATEMENT

This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated
in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference
to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.

Unauthorized changes or modification to this system can void
the users authority to operate this equipment.

NOTICE

Grounding Instructions

Do not modify the plug provided -  if it will not fit the outlet,
have the proper outlet installed by a qualified electrician.

Check with qualified electrician or service personnel if the
grounding instructions are not completely understood, or if in
doubt as to whether the tool is properly grounded.

Use only  3-wire extension cords that have  3-prong
grounding plugs and 3-pole receptacles that accept the tool’s
plug.

Repair or replace damaged or worn out cord immediately.