20
Sep. 2012
INTEGRA-7
3.
Press
ENTER
.
The ERP feature is activated and the power to the unit is turned off.
This completes the testing in the Test mode.
4.
Press the power switch to return to the “off” state.
Next, carry out testing of the
USB COMPUTER
connector.
11. USB COMPUTER
* This test is carried out in the normal performance mode.
1.
Make sure the power to the unit is turned off, then use the USB cable to
connect the computer running Windows and the unit.
2.
Turn on the power to the unit.
On the computer, at
Sound Device
, verify that the INTEGRA-7 is
recognized as a
MIDI device
.
* If the operating system is Windows XP, the product is displayed as
USB Audio
Device
.
* Make sure that no instrument other than the INTEGRA-7 is connected to the
computer.
* The unit is compatible with the Generic Driver, and so installing a dedicated
driver is not required.
3.
If no problem is found, turn off the power to the unit.
This completes all testing.
