26
Sequencer
The JX-10 Upgrade contains a
polyphonic 6 track sequencer that
has the capacity of 124 step
automatic playing.
The clock for the Sequencer is
always the Master Clock and this can
be divided by one of 13 different
ratios including swing options. The
Seq Clock Divide parameter is set
using the SEQ STEP button and
changed using the Alpha Dial.
Note - If the Master clock source is
set to the Midi Clock and no midi
clock is present the Sequencer will
not run.
SEQ LOAD
This button followed by a Number
pad button (1-8 only) is used to
select and load a sequence.
There are 8 Sequence memories and
only one of these can be selected at
a time.
SEQ EDIT
A Long press of this button will enter
sequence edit mode (see the
sequence edit section)
SEQ STEP TIMING
This button allow the Sequence clock
divide ratio to be changed using the
Alpha Dial. Press SEQ STEP again to
exit this mode.
The Seq Clock Timing can be set to 1 of
13 options. These are:
Half Note (48 Clocks/Step)
Quarter note (24 Clocks/Step)
8th note (12 Clocks/Step)
8th note, half swing (14,10 Clocks/Step)
8th note, full swing (16,8 Clocks/Step)
8th note triplets (8 Clocks/Step)
16th note (6 Clocks/Step)
16th note, half swing (7,5 Clocks/Step)
16th note, full swing (8,4 Clocks/Step)
16th note triplets (4 Clocks/Step)
32nd note (3 Clocks/Step)
32nd note triplets (2 Clocks/Step)
64th note triplets (1 Clocks/Step)
www.kiwitechnics.com
JX-SJX Upgrade User Manual v100
Summary of Contents for Kiwitechnics KIWI-SJX
