Saving Frequently Used Media Sizes (Preset Function)
8
Chapter 1 Fully Utilizing the Machine
MEMO
Every time you set up the media, you can set the print area (base position and range) . For details, refer to
“Setting the Print Area for Each Setup of Media” (p . 12) .
8.
Start printing .
Printing is performed with the loaded preset settings .
Make Fine Adjustments of Preset Settings and Print
You can change part of a preset and then perform printing .
For instance, you can change the print area only without changing the media height setting .
Procedure
1.
Load a preset and fix the position of the media by following steps 1 to 7 of “Load a Preset and Print” (p .
7) .
2.
If you want to change the height setting of the media, set the height of the media .
"
Steps 2 to 5 of "2 . Setting the Height of the Media Automatically" (First Step Guide)
"
Steps 4 and 5 of “Setting the Height of the Media Manually” (p . 9)
3.
If you want to change the print area, set the print area .
"
“Changing the Print Area” (p . 13)
4.
Start printing .
