17
Functionality added in version 1.31
A function has been added that automatically applies the channel names on the M-380 to the track names on the R-1000 when an R-1000 48-track recorder/
player is connected via REAC and the M-380 is used as a recording source.
This function does not work when the version of the R-1000's system program is earlier than 1.100.
1.
Display the R-1000 CONTROL popup.
2.
At PREFERENCE, select the Name sync check box.
When recording is performed on the R-1000, the channel names on the M-380 used as the recording source are applied to the track names on the R-1000.
The following rules are used to assign the track names according to the settings for the recording-use INPUT patchbay on the R-1000 (the input connector
assigned to the recording track) and the M-380's patchbay settings.
Automatic application of M-380 channel names to R-1000 track names
Assignment to R-1000 recording track
Applied track name
MAIN L, R, C
Channel name
MAIN MONO
MAIN M
AUX 1 – 16
Channel name
MTX 1 – 8
MONITOR L, R
MON L, MON R
REC L, R
REC L, REC R
CH1 to 48 direct out
Channel name
OSCILLATOR
OSC
TALKBACK
TB
REAC A IN 1 – 40
When the corresponding input port is patched to the input channel, the channel name.
When not patched, A IN1 to A IN40
REAC B IN 1 – 40
When the corresponding input port is patched to the input channel, the channel name.
When not patched, B IN1 to B IN40
