2
AT-500
You can also use the following procedure to turn the EZ Touch
function on.
1.
Hold down the Composer [Reset] button and press the
Pedal [To Lower] button.
A message letting you know that the EZ Touch function
has been turned on will be displayed for a few seconds.
2.
To turn off the EZ Touch function, hold down the Composer
[Reset] button once again and press the Pedal [To Lower]
button.
“Other Settings”
Owner’s Manual: p. 210
You can specify the language in which the demo screen
messages, confirmation messages, and error messages are
shown.
This will not change the language in which function
names or parameter names are shown.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch <
> <
> to display the Language.
3.
Touch the Language setting.
4.
Touch <
> <
> to change the setting.
5.
Touch <Exit>.
Selecting the Screen Language (Language)
Setting
DUTCH, ENGLISH, FRENCH, GERMAN, ITALIAN, JAPANESE,
PORTUGUESE, SPANISH
NOTE
Copyright © 2009 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
*
5
1
0
0
0
0
6
7
9
3
-
0
1
*
