13
21: SPACE-D
This is a multiple chorus that applies two-phase modulation in stereo. It gives no impression of modulation, but produces a
transparent chorus effect.
Knob
Parameter
Value
Explanation
Pre Delay
0.0–100 msec
Adjusts the delay time from the direct sound until the chorus sound is heard.
Rate BPM Sync
OFF, ON
OFF: Rate specified as numerical value
ON: Rate specified as note value
[Knob 1]
Rate
0–127, note
Frequency of modulation
[Knob 2]
Depth
0–127
Depth of modulation
Phase
0–180 deg
Spatial spread of the sound
Wet Low Gain
-15–+15 dB
Amount of boost/cut for the effect sound’s lower range
Wet High Gain
-15–+15 dB
Amount of boost/cut for the effect sound’s upper range
[Knob 3]
Balance
D100:0W–D0:100W
Volume balance between the direct sound (D) and the chorus sound (W)
Level
0–127
Output Level
22: PHASER
A phase-shifted sound is added to the original sound and modulated.
Knob
Parameter
Value
Explanation
Mode
4-STAGE, 8-STAGE,
12-STAGE
Number of stages in the phaser
[Knob 2]
Manual
0–127
Adjusts the basic frequency from which the sound will be modulated.
Rate BPM Sync
OFF, ON
OFF: Rate specified as numerical value
ON: Rate specified as note value
[Knob 1]
Rate
0–127, note
Frequency of modulation
Depth
0–127
Depth of modulation
Polarity
INVERSE, SYNCHRO
Selects whether the left and right phase of the modulation will be the same or the
opposite.
INVERSE: The left and right phase will be opposite. When using a mono source,
this spreads the sound.
SYNCHRO: The left and right phase will be the same. Select this when inputting a
stereo source.
[Knob 3]
Resonance
0–127
Amount of feedback
Wet Low Gain
-15–+15 dB
Amount of boost/cut for the effect sound’s lower range
Wet High Gain
-15–+15 dB
Amount of boost/cut for the effect sound’s upper range
Mix
0–127
Level of the phase-shifted sound
Level
0–127
Output Level
