background image

12

3

Setting up and connection

Do not use with any power supply
other than the dedicated AC adapter.

Use with any other power supply may lead
to fire or electrocution.

Do not use with any electrical power
supply that does not meet the
ratings displayed on the AC adapter.

Use with any other power supply may lead
to fire or electrocution.

Install on a stable surface.

Failure to do so
may result in
falling of the unit,
leading to injury.

Use within a temperature range of 5 to 40

°

C (41 to 104

°

F) and within a humidity range of 35 to 80%.

Securely connect the power cord, computer I/O cable and so on so that they will not be unplugged and cause
failure during operation.  Doing so may lead to faulty operation or breakdown.

NOTICE

When you carry the PIX-30, use two hands to
securely grip this area on the left and right sides.

Never install this unit in any of the following situations, as it could result in damage:

Places where the installation surface is unstable or not level.
Places with excessive electrical noise.
Places with excessive humidity or dust.
Places with poor ventilation, because the PIX-30 generates considerable heat during operation.
Places with excessive vibration.

Summary of Contents for Picza PIX-30


































Reviews: