24
9
Starting scanning
About scanning conditions and the scanning area
For information about the setting items for Dr. PICZA, refer to the figures below.
The grid on the table serves as a guide for mounting the object to scan.
It does not indicate the scanning area for Dr. PICZA.
The scale is in 10-mm (3/8 in.) units.
Do not place hands near the main
unit while in operation.
Doing so may result in injury.
Doing so may lead to faulty operation or
breakdown.
Setting scanning conditions and starting scanning
Y SCAN PITCH
(Spacing of adjacent scan points
along the Y axis)
Scanning Area
: Scan path
(Draft scanning)
: Scan points
Scanning area
Maximum
scanning area
Maximum
scanning area
Z BOTTOM
(Height of the scanning area's
bottom plane)
The explanations here and after are based on samples like
those shown in the figures.
Scan object
Z Upper
Limit
Table
surface
X SCAN PITCH
(Spacing of adjacent scan
points along the X axis)