31
Setting from the Control Panel
Setting the Input Mixer
You can control the monitor level of the audio data being input via the INPUT 1L jack, INPUT 2R jack,
or COAXIAL IN (3/4) jack.
Adjusting the monitor level does not affect the recording level.
Setting the Sampling Rate
The sampling rate setting of the QUAD-CAPTURE automatically changes to match the rate of the
audio data that is played, or the rate that your DAW software is set to when recording.
You can also change the sampling rate of the QUAD-CAPTURE manually. Click
of the SAMPLE
RATE, then select another sampling rate. In this case, you may also need to change the sampling rate
of the DAW software.
*
The sampling rate cannot be changed during playback or recording, or when equipment is
connected to the COAXIAL IN (3/4) jack.
*
When the sampling rate is switched, a small pop noise may be heard, but this does not indicate a
malfunction.
