19
Recording
Recording Instruments or Vocals
Using the Built-in Mics
L
R
The built-in mics are stereo.
The mic on the right side of the R-07 will record the right (R)
channel, and the mic on the left side will record the left (L)
channel.
NOTE
5
To avoid acoustic feedback (a whine or howling sound), do
not connect external speakers when you’re recording via a
mic.
5
The built-in mics cannot be used if a mic or device is
connected to the MIC/AUX IN jack. If you want to use the
built-in mics, don’t connect anything to the MIC/AUX IN jack.
MEMO
If you’re using headphones to monitor (listen to) the sound
while it’s being recorded, turn the Rec Monitor SW “ON.”
For details, refer to “Settings for the R-07” (p. 38).
Using an External Mic
Stereo mic
A dynamic mic or a condenser mic of the type designed for
connection to a computer’s mic jack can be used with the R-07.
NOTE
5
To avoid acoustic feedback (a whine or howling sound), do
not connect external speakers when you’re recording via a
mic.
5
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
power on all devices before making any connections.
Settings for the type of mic you’re using
External mic type setting
Here’s how to switch the mono/stereo setting as appropriate for
the mic that’s connected to the MIC/AUX IN jack.
MEMO
If you’re using a mono mic, and record with the external mic
type set to “STEREO,” only the L channel will be recorded.
If you use the “MONO” setting, the same sound will be
recorded on the L and R channels.
1
Press [MENU] to access the “Menu” screen, use
[
]/[ ] to select “Input,” and then press [ ].
2
Use [
]/[ ] to move the cursor to the EXT Mic
Type setting, and use [
]/[
] to choose “MONO”
or “STEREO.”
(Default in bold)
EXT Mic Type
STEREO
If the external mic is stereo
MONO
If the external mic is mono
3
Press [MENU] twice to return to the main screen.
Summary of Contents for R-07
Page 1: ...Reference Guide...
