Roland R-07, Reference Manual

3

Panel Descriptions

Display

This shows various types of 

information for the R-07.

PEAK indicator

This will light when the input volume 

is excessive.

Bluetooth indicator

This blinks when pairing with a 

Bluetooth speaker or headphones 

(p. 10). It is lit if the R-07 is 

connected to a Bluetooth speaker 

or headphones, or when the remote 

control is on (p. 26).

Built-in mics

This is a stereo mic built into the unit.

[SCENE] button

This button lets you switch scenes 

(p. 13) that recall settings suitable for a 

specific recording situation.
Long-press this button to flip the 

display vertically.

[MENU] button

This button lets you make various 

settings for the R-07, such as 

recording/playback settings and 

specifying the date and time.

[REHEARSAL] button

This button automatically sets the 

appropriate recording level (p. 18).

[MARK] button

For a WAV file, you can press this 

button to add a mark at a desired 

location (p. 23). If you press this 

button at a marked location, the mark 

is removed.

Remote indicator

Operation

Status

Lit

Recording

Blinking (slow)

Record-standby

Blinking (fast)

Input overload

[A

B] button

This button lets you repeatedly play 

between two points (the A–B region) 

of a file (p. 23). When you assign an 

“A” marker and “B” marker in the file, 

playback will repeat between the “A” 

and “B” markers. Pressing the button 

the first time assigns the “A” marker, 

and pressing it a second time assigns 

the “B” marker.

[ ] button

Press this button to select the next file. 

For a WAV file that contains marks, this 

button advances to the next mark. By 

holding down this button, you can 

fast-forward through the file. 
You can do this during playback or 

while stopped.
This button also moves the cursor to 

the right in the screen, or changes the 

value of the selected item.

[ ] button

Press this button to move to the 

beginning of the file, or to select 

the previous file. For a WAV file that 

contains marks, this button returns to 

the previous mark. By holding down 

this button, you can rewind through 

the file.
You can do this during playback or 

while stopped.
This button also moves the cursor to 

the left in the screen, or changes the 

value of the selected item.

INPUT [+] [–] buttons

These buttons adjust the level of the 

audio that’s being input via the built-

in mics or the MIC/AUX IN jack.
Pressing [+] will increase the input 

level. Pressing [–] will decrease the 

input level.
You can change the playback speed 

by pressing these buttons during 

playback (p. 24).

[

] button

Press this button to start playback, or 

to pause playback or recording.
This button also moves the cursor 

upward in the screen, or changes the 

value of the selected item.

[ ] button

This button stops playback or 

recording.
This button also moves the cursor 

downward in the screen, or changes 

the value of the selected item.

VOL [+] [–] buttons

These buttons adjust the volume that 

is output from the built-in speaker, the 

PHONES jack or the Bluetooth device.

REC/PLAY indicator

Operation

Status

Lit red

Recording

Blinking red

Record-standby

Lit green

Playing

Blinking green

Play-standby

[ ] button

Press this button to enter recording-

standby mode or to begin recording.
You’ll also use this button to confirm 

a selection.