20
Recording
Plug In Power setting
Turn this setting “ON” if you’re using a plug-in powered mic; turn it
“OFF” if you’re using a mic that uses a battery or does not require a
plug-in power supply.
1
Press [MENU] to access the “Menu” screen, use
[
]/[ ] to select “Input,” and then press [ ].
2
Use [
]/[ ] to move the cursor to the Plug In
Power setting, and use [
]/[
] to choose “ON” or
“OFF.”
(Default in bold)
Plug In Power
OFF
Dynamic mic, or condenser mic
with an internal battery
ON
ON Plug-in powered condenser mic
NOTE
If you’ve connected a dynamic mic or a mic that has an
internal battery, you must turn Plug In Power “OFF.” Using
the wrong setting may damage your equipment.
3
Press [MENU] twice to return to the main screen.
About dynamic mics
This type of mic is rugged, and is suitable for recording
vocals and instruments. It does not require a power supply.
About condenser mics
This type of mic features high sensitivity, and is suitable for
recording lower-level sounds such as acoustic instruments
and conferences. It requires power to be supplied from a
battery or via plug-in power.
Recording from a Cassette or CD
In addition to recording instrumental performances or voice
memos via a mic, the R-07 lets you use the MIC/AUX IN jack to
record sound from a cassette or CD.
NOTE
5
When connection cables with resistors are used, the volume
level of equipment connected to the inputs (MIC/AUX IN)
may be low. If this happens, use connection cables that do
not contain resistors.
5
If you want to record from a connected record player, you’ll
need to obtain a phono equalizer separately.
In this example, we’ll explain how the sound from an CD player
can be recorded into the R-07.
Line output jacks
1
Connect your CD player.
Use an audio cable to connect your CD player’s line output jacks
to the R-07’s MIC/AUX IN jack.
2
Adjust the input level.
Adjust the input level while playing back the desired song on your
CD player.
When you’ve finished adjusting the input level, set your player
back to the beginning of the song you’ll be recording.
Summary of Contents for R-07
Page 1: ...Reference Guide...
