23
Recording Audio
Basic Editing Operations
5
When you press the PLAY button, sounds are input to the
input jacks, and recording begins.
* Even when the PLAY button is pressed, recording does not begin until the sound is
at or above the base level (-36 dBu) (in trigger recording standby).
While recording is in progress, the PLAY indicator lights, and a dot flashes
in the display.
fig.rec-06
* When the card becomes full, recording will stop automatically.
6
Press the Stop button to end recording.
fig.rec-07
Checking What You Recorded
After recording ends, you can play back the phrase by pressing the Play
button.
Information Recorded on the Card
The AR-200R stores recorded audio and MIDI signals on the card.
Additionally, all settings data (such as MIDI channels and other
information) is stored on the card (the information is not stored in the AR
unit itself).
This means that you can change the settings simply by swapping cards.
The MEMORY FULL
indicator tells how much
recording time is left. The
MEMORY FULL indicator
light flashes when the
recorded data reaches 90%
of the card’s capacity, then
stays on when 100%
capacity is reached.
AR-200R_e.book 23 ページ ２０１０年７月１日 木曜日 午前１１時２４分
Summary of Contents for RSS AR-200R
Page 40: ...40 MEMO AR 200R_e book 40 ページ ２０１０年７月１日 木曜日 午前１１時２４分 ...
Page 49: ...49 Appendices AR 200R_e book 49 ページ ２０１０年７月１日 木曜日 午前１１時２４分 ...
Page 70: ...For EU Countries AR 200R_e book 70 ページ ２０１０年７月１日 木曜日 午前１１時２４分 ...
Page 72: ... 0 4 2 3 5 0 8 9 0 6 AR 200R_e book 72 ページ ２０１０年７月１日 木曜日 午前１１時２４分 ...
