8
Be sure to install the media guide
when loading roll media.
Otherwise the roll may
fall and cause injury.
Load roll media at the proper position.
Otherwise the roll may
fall, resulting in injury.
Do not touch the tip of the blade with
your fingers.
Doing so may result in injury, and the cutting
performance of the blade will be impaired.
Do not touch the control panel while
head cleaning or other cleaning is in
progress.
The printing carriage may move and cause
injury.
Before switching on the power, be
sure to install the drain bottle.
Otherwise discharged fluid may leak from the
machine.
Do not place hands within the space
to the front of the unit while in opera-
tion.
Doing so may
result in injury.
Do not touch the tip of the separating
knife with your fingers.
Doing so may result in injury.
When cleaning the unit, be sure to
wait approximately 30 minutes or
more after switching off the power of
the printer until the temperature of the
platen falls sufficiently.
Doing so may cause burns because the
platen is hot.
Do not touch the platen when the
heater is operating.
Doing so may cause burns because the
platen is hot.
To Ensure Safe Use
Summary of Contents for SP-300
