3 Replacement of Main Parts
3-6
3
Turn on the SUB POWER SW while pressing the Left,
Right and Down keys to enter the SERVICE MODE.
[MENU] key
[ ], [ ], [ ] + POWER ON
MENU
SERVICE MENU
19
Select [CAP&WIPER CTRL] > [CAP] > [UP], and press
the [ENTER] key to move up the capping unit 1 step.
Check that the GUIDEs at the two ends of the capping
unit align with the GUIDEs at the two ends of the head
carriage. Then press the [ENTER] key twice more to
cap the heads.
20
17
Fix the 2 INK DAMPERs to the head.
Do not hold both sides of the INK DAMPER
so hard. It could break.
CYAN
YELLOW
BLACK
MAGENTA
18
Move the HEAD CARRIAGE by hand to the lock
position.
Summary of Contents for SP-300
