Chapter 1
Chapter 1
-
-
5 : Handling
5 : Handling
• Transportation by users
Ink inside the machine should be removed by
performing
HEAD WASH
when transporting the
machine. If not, ink could spill inside the machine.
• Removing Ink Function
HEAD WASH
-
Remove ink and also clean the ink line with
cleaning liquid.
(SP-300 requires 4 Cleaning cartridges for Head Wash.)
- 4 Cleaning Cartridges : 423 sec.
Consumption:
Ink : 26cc Cleaning Liquid : 145cc
Note :
Please make sure to fill ink within 1 week once you perform the HEAD
WASH. If not, cleaning liquid remaining inside the Heads
could cause the printing problems, such as missing dots /
shifting dots. In the worst case, the head will be broken.
Summary of Contents for SP-300
