Quick Start
23
■
EQ/SEND Button
When you press the [EQ/SEND] button so it lights in red, you can control the 4-band EQ and Aux
send levels of the track/bus selected by CH SELECT.
PAN knobs 1–8:
EQ band #1–4 gain and freq. (Except MIDI track was selected.)
PAN knobs 9–12:
Aux 1-4 send level. (Only audio track was selected.)
EQ buttons 1-4:
EQ band #1–4 on/off
EQ are already assigned in the Cakewalk Normal template (Track 1-12). You need to
assign EQ manually, when using other tracks or templates.
■
PLUG-IN Button
When you press the [PLUG-IN] button so it lights in red, you can control DirectX 8 compatible
plug-in parameters for the track/bus selected by CH SELECT.
PAN knobs 1–10:
Parameter 1-10 of plug-in selected by EQ buttons 1-4.
PAN knobs 11:
Bypass on/off of plug-in selected by EQ buttons 1-4.
EQ button 1–4:
Select plug-in 1-4.
The plug-in parameters to which the SI-24’s knobs 1–10 correspond will depend on
the plug-in.
■
LOCATE Button
When you press the [LOCATE] button so it lights in red, the [Num Pad 1–0] buttons will have the
following functions.
[1]:
Specify the Now time as the time from which a selection extends.
[2]:
Specify the Now time as the time through which a selection extends.
[3]:
Set loop to selection.
[4]:
Loop on/off.
[5]:
Set the Now time to the end of the project.
[6]:
Set the Now time to the From time.
[7]:
Set the Now time to the Thru time.
[8]:
Set the Now time to the previous marker.
[9]:
Set the Now time to the next marker.
[0]:
Insert a marker at the Now time (during playback) or a specified location.
