background image

10

Practicing in Coach Mode (COACH)

AUTO UP/DOWN settings

Here you can specify the duration of your practice time, and 

set the upper and lower tempo limits.

1  

In the AUTO UP/DOWN screen, use the [

C

][

A

buttons to select the item (parameter) that you 

want to set.

2  

Use the dial to change the value.

Parameter

Value

Explanation

Duration

Specifies the time.

1, 3, 5, 10, 15 

MIN

Selects the duration (minutes) 

of practice.

MaxTempo

21–260 

(bpm)

Specifies the upper tempo 

limit.
*  This can only be set to 

a value higher than the 

current tempo.

Tempo

20–260 

(bpm)

Specifies the lower tempo 

limit.

3  

Press the [

] (DRUM KIT) button to return to 

the DRUM KIT screen.

Playing Along with a Changing Rhythm 

(CHANGE UP)

The rhythm type will change every two measures. Starting 

from half notes, the note values will gradually become 

shorter, and will then return to half notes; this change in 

rhythms will be repeated.

1  

In the CHANGE UP screen, press the [ ] 

(ENTER) button.

A two-measure count-in is played when you start.

MEMO

If you decide to stop mid-way through practice, press the 

[ ] (EXIT) button.

2  

Strike the pad in time with the metronome.

During practice, the screen shows the tempo and the 

rhythm type. The remaining time

 

is shown in the lower 

right of the screen.

Ì=120        2-1

       Ì       3

This ends when the specified time has elapsed, and the 

strike timing is evaluated.

Finished! [EXIT]

    SCORE:100

3  

Press the [ ] (EXIT) button to finish.

CHANGE UP settings

Here’s how to specify the duration of your practice time and 

the tempo.

1  

In the CHANGE UP screen, use the [

C

][

A

buttons to select the item (parameter) that you 

want to set.

2  

Use the dial to change the value.

Parameter

Value

Explanation

Duration

Specifies the time.

1, 3, 5, 10, 15 MIN

Selects the duration 

(minutes) of practice.

Tempo

20–260 (bpm)

Sets the tempo

3  

Press the [

] (DRUM KIT) button to return to 

the DRUM KIT screen.

Summary of Contents for TD-07































Reviews: