Roland TD-6V, Service Notes

14

Feb.2004

10.Sound Test

1.

Make sure that no sound is heard.

fig.test23

2.

Press [ENTER] button, and make sure that a sine wave is output from 
both L-side and R-side of the OUTPUT and the PHONES.

fig.test24

3.

Press [ENTER] button, and make sure that a sine wave output from only 
L-side of the OUTPUT and the PHONES.

fig.test25

4.

Press [ENTER] button, and make sure that a sine wave is output from 
only R-side of the OUTPUT and the PHONES.

fig.test26

By Pressing [ENTER] button, you can change the mode (output from both side, 
output from only L-side, output from only R-side, sound off, outoput from 
both side etc).

5.

If the result is ‘OK’, press [>] button to proceed to the next test.

11.Effect Test

1.

Press [ENTER] button and make sure that the sound processed by the 
effect is heard.

Sound: Cross Stick

fig.test27

2.

If the result is ‘OK’, press [>] button to proceed to the next test.

12.Factory Reset

1.

Press [ENTER] button to execute Factory Reset.

2.

When the following display appears, Factory Reset has been completed.

fig.test27

3.

This ends test mode.

Turn off the power.

RESTORING THE FACTORY 
SETTINGS

This restores the pad and instrument settings, song data, and other 
information stored in the TD-6V to the original factory settings.

1.

While holding down [SHIFT] and [EDIT (SETUP)] and press [POWER] 
button to turn on the power.

The Factory Reset screen appears.

fig.fact01

2.

Press [INC/+] or [DEC/-] button to select the parameter you want to 
restore to factory settings.

ALL: All internal settings will be restored to the factory settings.

THIS DRUM KIT: Only the settings for the currently selected drum kit are 
restored to the factory settings.

ALL DRUM KITS: The settings for all of the TD-6V’s internal drum kits are 
restored to the factory settings.

ALL SONGS: All of the TD-6V’s internal song data is restored to the factory 
settings.

3.

Press [ENTER] button.

Press [EXIT] button to cancel the operation.

fig.fact02

4.

If you’re ready to proceed, press [ENTER] button, and the Factory Reset 
operation will be executed.

5.

When the Factory Reset is finished, the Completed screen appears.

fig.fact03