36
Error Message List
Display
Meaning
Action
SDCard
NotReady!
The SD card is not
inserted, or is inserted
incompletely.
Turn off the unit, firmly
insert the SD card, and
then turn on the unit
once again.
The SD card was
removed after you
selected data that was on
the SD card.
The format of the SD card
is invalid.
Use the TR-6S to format
the SD card
.
Read Error!
Data could not be read
from the SD card.
Make sure that the SD
card is correctly inserted.
The file is damaged.
Do not use this file.
Write Error!
Data could not be
written to the SD card.
Make sure that the SD
card is correctly inserted.
The format of the SD card
is invalid.
Use the TR-6S to format
the SD card (p. 7).
SD Card Full!
There is insufficient space
on the SD card.
Delete unneeded data.
Sys Mem
Damaged!
The contents of the
TR-6S’s save area may be
damaged.
Execute the factory
reset operation (p. 33).
If this does not solve
the problem, contact
your dealer or customer
support.
MIDI Buff
Full!
An unusually large
amount of MIDI data was
received, and could not
be processed.
Reduce the amount of
MIDI messages that are
being transmitted.
MIDI Offline!
The MIDI IN connection
was broken.
Check that there is no
problem with the MIDI
cable connected to the
TR-6S’s MIDI IN, and that
the MIDI cable was not
disconnected.
Program
Error!
The TR-6S was unable
to start up. The program
could not be read
correctly. Alternatively,
the system update
program may be invalid.
Use the correct program
to perform the update
once again. If this does
not solve the problem,
contact your dealer or
customer support.
Now Playing!
Since the TR-6S is
playing, this operation
cannot be executed.
Stop playback before you
execute the operation.
Now
Recording!
Since the TR-6S is
recording, this operation
cannot be executed.
Stop recording before
you execute the
operation.
Not Found!
The file was not found on
the SD card.
Make sure that the file
exists on the SD card.
Not
Supported!
The format of the audio
file is not supported.
In order to load the file,
you’ll need to convert it
to a supported format.
Too Long
Size!
The audio file exceeds
the supported number of
samples.
In order to load the
audio file, you’ll need
to shorten it (decrease
the number of samples)
or lower its sampling
frequency.
No Space!
There is no free space in
the user sample area.
Delete unneeded user
samples to increase the
amount of free space.
No Tone!
There is no enough free
space to save the user
sample tone settings.
Delete unneeded user
samples to increase the
amount of free space.
Display
Meaning
Action
!!CAUTION!!
BATTERY LOW
The battery has run
down.
Replace the battery,
or use a USB cable to
connect the unit to your
computer.