background image

7

Panel Descriptions

Before You Begin Playing

*  Before turning the unit on/off, always be sure to turn the volume down. 

Even with the volume turned down, you might hear some sound when 

switching the unit on/off. However, this is normal and does not indicate a 

malfunction.

Turning the TR-6S On

1  

Turn on the power in the order of the TR-6S first, and 

then the connected system.

2  

Switch on power to the connected equipment, and 

raise the volume to an appropriate level.

Turning Off the Power

1  

Power-off the connected system first, and then the 

TR-6S.

Formatting an SD Card 

(SD CARD FORMAT)

If using an SD card, please format it on the TR-6S. SD cards are sold 

separately. Please obtain a SD card separately.

1  

Press the 

[UTILITY]

 button.

The UTILITY screen appears.

2  

Use the 

[VALUE]

 knob to select 

“SD CARD:Format ”

3  

Press the 

[VALUE]

 knob.

A confirmation message appears.

4  

To execute, use the 

[VALUE]

 knob to select 

“OK,”

 

and press the 

[VALUE]

 knob.

If you decide to cancel, use the [VALUE] knob to select “Cancel,” and 

then press the [VALUE] knob.

Summary of Contents for TR-6S








































Reviews: