background image

17

Editing the Pattern Settings (Pattern Setting)

Saving the Pattern, Kit, or System Settings 

(WRITE)

Here’s how to save a pattern or kit.

1  

Hold down the 

[SHIFT]

 button and press the 

[EXIT]

 

button.

The WRITE screen appears.

2  

Use the 

[VALUE]

 knob to select what you want to 

save, and press the 

[VALUE]

 knob.

The WRITE screens appear in the order of “Overwrite” 

0

 “Pattern” 

0

 “Kit” 

0

 “System.”

*  If “System” is selected, a confirmation screen appears. Proceed to step 4.
*  “Overwrite” saves the pattern and kit simultaneously. Proceed to step 4.

3  

Use the 

[VALUE]

 knob to select the save-

destination, and press the 

[VALUE]

 knob.

A confirmation message appears.

4  

To save, use the 

[VALUE]

 knob to select 

“OK,”

 and 

press the 

[VALUE]

 knob.

If you decide to cancel, use the [VALUE] knob to select “Cancel,” and 

then press the [VALUE] knob.

Shortcuts for save operations

Operation

Operating the Unit

Save a pattern

(PATTERN WRITE screen)

Hold down the [EXIT] button and 

press the [PTN SELECT] button.

Save a kit

(KIT WRITE screen)

Hold down the [EXIT] button and 

press the [KIT] button.

Copying a Pattern or Kit 

(COPY)

Here’s how to copy a pattern or kit.

1  

Press the 

[COPY]

 button.

The COPY screen appears.

2  

Use the 

[VALUE]

 knob to select what you want to 

copy, and press the 

[VALUE]

 knob.

The COPY screens appear in the order of “Pattern” 

0

 “Variation” 

0

 “Track” 

0

 “Kit” 

0

 “Inst.”

3  

Use the 

[VALUE]

 knob to select the copy-source, and 

press the 

[VALUE]

 knob.

4  

Use the 

[VALUE]

 knob to select the copy-

destination, and press the 

[VALUE]

 knob.

A confirmation message appears.

5  

Use the 

[VALUE]

 knob to select 

“OK,”

 and press the 

[VALUE]

 knob.

If you decide to cancel, use the [VALUE] knob to select “Cancel,” and 

then press the [VALUE] knob.

Shortcuts for copy operations

Operation

Operating the Unit

Copy a pattern

(PATTERN COPY screen)

Hold down the [COPY] button and press the 

[PTN SELECT] button.

Copy a kit

(KIT COPY screen)

Hold down the [COPY] button and press the 

[KIT] button.

Copy an 

instrument

(INST COPY screen)

Hold down the [COPY] button and press the 

[INST] button.

Copy a track

While holding down the [COPY] button, press 

the [BD]–[OH] button of the copy-source and 

copy-destination.

Summary of Contents for TR-6S








































Reviews: