background image

22

Various Settings

Returning to the Factory Settings 

(FACTORY RESET)

Here’s how to return the TR-8S to its factory-set state.

1. 

Press the 

[UTILITY]

 button.

The UTILITY screen appears.

2. 

Use the 

[VALUE]

 knob to select 

“UTILITY: Factory 

Reset.”

3. 

Press the 

[ENTER]

 button.

The target selection screen appears.

Target

Explanation

ALL

Returns all settings including patterns and 

kits to their factory-set state.

KIT

Returns only the kit settings to their factory-

set state.

PTN

Returns only the patterns to their factory-set 

state.

4. 

Use the 

[VALUE]

 knob to select the target, and 

press the 

[ENTER]

 button.

A confirmation message appears.

5. 

To execute, use the 

[VALUE]

 knob to select 

“OK,”

 

and press the 

[ENTER]

 button.

If you decide to cancel, use the 

[VALUE]

 knob to select 

“Cancel,”

 

and then press the 

[ENTER]

 button.

6. 

When the display indicates 

“Completed. Turn off 

power.”

 turn the TR-8S’s power off and on again.

Backing Up Data to SD Card 

(BACKUP)

*  If you want to make a backup, save the data (patterns, kits, system 

settings) before you proceed. The backup will not include the pattern 

or kit that you’re currently editing (shown by an 

“*”

 indication) or 

system settings that you have not saved.

1. 

Press the 

[UTILITY]

 button.

The UTILITY screen appears.

2. 

Use the 

[VALUE]

 knob to select 

“UTILITY: Backup.”

3. 

Press the 

[ENTER]

 button.

The BACKUP:NAME screen appears.

MEMO

If a backup file already exists, the BACKUP:SELECT screen 

appears.

To overwrite-save, select the existing backup file and press the 

[ENTER]

 button.

If you select Save As and press the 

[ENTER]

 button, the 

BACKUP:NAME screen appears.

4. 

Edit the name if necessary.

5. 

Press the 

[ENTER]

 button.

A confirmation message appears.

6. 

To execute, use the 

[VALUE]

 knob to select 

“OK,”

 

and press the 

[ENTER]

 button.

If you decide to cancel, use the 

[VALUE]

 knob to select 

“Cancel,”

 

and then press the 

[ENTER]

 button.

Summary of Contents for TR-8S

























Reviews: