4
Panel Descriptions
1
Common section 1
[VOLUME]
knob
Adjusts the MIX OUT jack, PHONES jack’s volume.
* This does not affect the volume of the ASSIGNABLE OUT jack (p. 7).
[EXT IN]
knob
Adjusts the input volume from the EXT IN jacks.
[SHIFT]
button
By holding down this button and operating certain other buttons,
you can access a screen for making related settings.
If you edit a parameter value while holding down this button, the
value will change more greatly.
[CLEAR]
button
Erases the recorded content for an individual instrument, or
deletes a pattern.
[PTN SELECT]
button
Select a pattern.
[TR-REC]
button
Step-records a pattern.
[LAST]
button
Specifies the length of the pattern.
[SUB]
button
Specifies duplets, triplets, or quadruplets as the
step.
MOTION
[ON]
button
If this is ON, knob operation data (MOTION) is
played back for each instrument.
MOTION
[REC]
button
If REC is selected, knob operation data (MOTION)
is recorded for each instrument.
[INST PLAY]
button
Use the pads
[1]
–
[13]
to perform in real time.
You can perform even while a pattern is playing.
[INST REC]
button
Realtime-record a pattern.
[A]
–
[H]
buttons
Switch pattern variations (A–H).
[START/STOP]
button
Play or stop the pattern.
* If a sample is selected as the instrument’s tone, the sound might not
stop automatically depending on the instrument edit settings.
While a pattern is stopped, you can silence all currently-sounding
samples by holding down the
[SHIFT]
button and pressing the
[START/STOP]
button.
2
ACCENT section
Adds an accent to the specified step.
[LEVEL]
knob
Adjusts the volume of the accent.
[STEP]
button
During TR-REC, you can use pads
[1]
–
[16]
to select steps at which
an accent is added.
Top Panel
1
2
7
8
10
5
6
9
3
4
