background image

16

Used for instructions intended to alert the 
user to the risk of injury or material 
damage should the unit be used 
improperly. 
* Material damage refers to damage or 

other adverse effects caused with 
respect to the home and all its 
furnishings, as well to domestic animals 
or pets. 

Used for instructions intended to alert the 
user to the risk of death or severe injury 
should the unit be used improperly. 

The       symbol alerts the user to things that must be 
carried out. The specific thing that must be done is 
indicated by the design contained within the circle. In the 
case of the symbol at left, it means that the power-cord 
plug must be unplugged from the outlet. 

The       symbol alerts the user to important instructions or 
warnings.The specific meaning of the symbol is 
determined by the design contained within the triangle. In 
the case of the symbol at left, it is used for general 
cautions, warnings, or alerts to danger. 

The       symbol alerts the user to items that must never be 
carried out (are forbidden). The specific thing that must 
not be done is indicated by the design contained within 
the circle. In the case of the symbol at left, it means that 
the unit must never be disassembled. 

About       WARNING and       CAUTION Notices

About the Symbols

ALWAYS OBSERVE THE FOLLOWING

 USING THE UNIT SAFELY

 WARNING

Do not disassemble or modify by 

yourself

Do not carry out anything unless 

you are instructed to do so in the 

owner’s manual. Otherwise, you 

risk causing malfunction.

Do not repair or replace parts by yourself

Refer all servicing to your retailer, 

the nearest Roland Service Center, 

or an authorized Roland distributor, 

as listed on the “Information.”

Do not use or store in the following types 

of locations

•  Subject to temperature extremes 

(e.g., direct sunlight in an 

enclosed vehicle, near a heating 

duct, on top of heat-generating 

equipment); or are

•  Damp (e.g., baths, washrooms, 

on wet fl oors); or are

•  Exposed to steam or smoke; or are
•  Subject to salt exposure; or are
•  Exposed to rain; or are
•  Dusty or sandy; or are
•  Subject to high levels of vibration and 

shakiness; or are

•  Placed in a poorly ventilated location.

Do not place in an unstable location

Otherwise, you risk injury as the 

result of the unit toppling over or 

dropping down.

Avoid extended use at high volume

Use of the unit at high volume 

for extended periods of time may 

cause hearing loss. If you ever 

experience any hearing loss or 

ringing in the ears, you should immediately 

stop using the unit and consult a specialized 

physician.

 WARNING

Do not allow foreign objects or liquids to 

enter unit; never place containers with 

liquid on unit

Do not place containers containing 

liquid (e.g., fl ower vases) on this 

product. Never allow foreign 

objects (e.g., fl ammable objects, 

coins, wires) or liquids (e.g., water 

or juice) to enter this product. 

Doing so may cause short circuits, 

faulty operation, or other malfunctions.

Turn off  the unit if an abnormality or 

malfunction occurs

Immediately turn the unit off , and 

request servicing by your retailer, 

the nearest Roland Service Center, 

or an authorized Roland distributor, 

as listed on the “Information” when:

•  If smoke or unusual odor occurs; or
•  Objects have fallen into, or liquid has been 

spilled onto the unit; or

•  The unit has been exposed to rain (or 

otherwise has become wet); or

•  The unit does not appear to operate 

normally or exhibits a marked change in 

performance.

Be cautious to protect children from 

injury

Always make sure that an adult is 

on hand to provide supervision 

and guidance when using the 

unit in places where children are 

present, or when a child will be using the 

unit.

Do not drop or subject to strong impact

Otherwise, you risk causing 

damage or malfunction.

 CAUTION

Route all power cords and cables in such 

a way as to prevent them from getting 

entangled

Injury could result if someone were 

to trip on a cable and cause the 

unit to fall or topple.

Avoid climbing on top of the unit, or 

placing heavy objects on it

Otherwise, you risk injury as the 

result of the unit toppling over or 

dropping down.

Disconnect all cords/cables before 

moving the unit

Damage or malfunction may result 

if you fail to disconnect all cables 

before moving the unit.

Precautions concerning use of phantom 

power supply

Always turn the phantom power 

off  when connecting any device 

other than condenser microphones 

that require phantom power. You 

risk causing damage if you mistakenly supply 

phantom power to dynamic microphones, 

audio playback devices, or other devices that 

don’t require such power. Be sure to check 

the specifi cations of any microphone you 

intend to use by referring to the manual that 

came with it.
(This instrument’s phantom power: 48 V DC, 

6 mA Max)

Summary of Contents for UA-4FX2



















Reviews: