Roland V-Compact TD-3KW, Owner'S Manual

12

USING THE UNIT SAFELY

fig.KD-8.e

1.

Remove the screws attached to the reverse side 

of the KD-8’s trigger.

fig.KD-Assy01

2.

Pull out the stand in the direction indicated by 

the arrow until it is fully extended.

fig.KD-Assy02

3.

Use a tuning key supplied with the FD-8 to 

tighten the screws removed in Step 

1

 so that 

the stand is firmly secured.

fig.KD-Assy03

4.

Attach the kick pedal.

Position the beater so that it strikes the center of the head, 
then secure the kick pedal and KD-8 firmly in place.

fig.KD-Assy04.e

Adjusting the Foot Plate Height

Depending on your kick pedal, it can be unstable when you 
attach it to the KD-8. Be sure to adjust the foot plate height so 
that the entire bottom surface of the pedal is attached to the 
floor.

fig.KD-Assy05.e

KD-8 

(Kick)

Making the Settings

Anchor Bolt

Head

Foot Plate

Stand

Output Jack

Install the kick pedal securely.

Beater

Commercially Available Kick Pedal

Beater

* Adjust the height so that the entire pedal comes 
  into contact with the floor.

TD-3KW_e 12 ページ ２００６年１月２４日　火曜日　午後６時７分