3
IMPORTANT NOTES
Placement
6
Do not expose the unit to direct sunlight, place it near devices
that radiate heat, leave it inside an enclosed vehicle, or otherwise
subject it to temperature extremes. Excessive heat can deform or
discolor the unit.
6
When moved from one location to another where the
temperature and/or humidity is very different, water droplets
(condensation) may form inside the unit. Damage or malfunction
may result if you attempt to use the unit in this condition.
Therefore, before using the unit, you must allow it to stand for
several hours, until the condensation has completely evaporated.
6
Do not allow rubber, vinyl, or similar materials to remain on
this unit for long periods of time. Such objects can discolor or
otherwise harmfully affect the finish.
Maintenance
6
For everyday cleaning wipe the unit with a soft, dry cloth or one
that has been slightly dampened with water. To remove stubborn
dirt, use a cloth impregnated with a mild, non-abrasive detergent.
Afterwards, be sure to wipe the unit thoroughly with a soft, dry
cloth.
6
Never use benzine, thinners, alcohol or solvents of any kind, to
avoid the possibility of discoloration and/or deformation.
Additional Precautions
6
Use a reasonable amount of care when using the output jacks.
Rough handling can lead to malfunctions.
6
When connecting / disconnecting all cables, grasp the connector
itself—never pull on the cable. This way you will avoid causing
shorts, or damage to the cable’s internal elements.
6
To avoid disturbing your neighbors, try to keep the unit’s volume
at reasonable levels. You may prefer to use headphones, so you do
not need to be concerned about those around you.
6
This instrument is designed to minimize the extraneous sounds
produced when it’s played. However, since sound vibrations
can be transmitted through floors and walls to a greater degree
than expected, take care not to allow these sounds to become a
nuisance to neighbors, especially when using headphones.
6
When you need to transport the unit, package it in the box
(including padding) that it came in, if possible. Otherwise, you will
need to use equivalent packaging materials.
6
The rubber portion of the striking surface is treated with a
preservative to maintain its performance. With the passage of
time, this preservative may appear on the surface as a white stain,
or reveal how the pads were struck during product testing. This
does not affect the performance or functionality of the product,
and you may continue using it with confidence.
6
Continuous playing may cause dis-coloration of the pad, but this
will not affect the Pad’s function.
6
Roland,V-Drums, and V-CYMBALS are registered trademarks of
Roland Corporation in the United States and/or other countries.
Copyright © 2017 ROLAND CORPORATION
• All product names mentioned in this document are trademarks or
registered trademarks of their respective owners.
Summary of Contents for V-Drums CY-12C
Page 8: ...8 For EU Countries ...
Page 9: ...9 ...
