32
Creating a Drum Kit
You can rewrite (restore) a specified drum kit’s settings to the factory settings (preset).
The restore-destination settings will be lost when you execute the Restore operation. Use this operation with care.
1.
In the menu screen, choose “5 KIT COPY” and press
the [OK] button.
The “Kit Copy” screen will appear.
fig.d-Kit-Copy-1.eps
2.
Use the [-/+] dial to select RESTORE.
3.
Press the SEL [
] button.
fig.d-Kit-Copy-2.eps
4.
Use the [-/+] dial to select the source drum kit for
the Restore operation.
* If you select RESTORE, a number from P1 through P25 will be
shown. “
P
” indicates a preset drum kit.
* At this time you can strike the pads to audition the drum kit
you’ve selected.
5.
Press the SEL [
] button.
fig.d-Kit-Copy-3.eps
6.
Use the [-/+] dial to select the destination drum kit
for the Restore operation.
7.
Press the SEL [
] button.
A confirmation message will blink.
fig.d-Kit-Copy-4.eps
* You can cancel by pressing the [MENU] button.
8.
To execute the Restore operation, press the [OK]
button.
The operation will be executed.
When the operation is completed, the following message will
appear and you’ll be returned to the drum kit screen.
fig.d-Kit-Copy-5.eps
Restoring a Drum Kit (RESTORE)
TD-4_e.book 32 ページ ２０１２年９月１０日 月曜日 午後１時４３分
Summary of Contents for V-Drums Portable TD-4KP
