Selecting a kit
Press [KIT], and the basic display page will appear. In this
page, you can use [INC/DEC],the VALUE dial or a foot
switch (optional) to select drum kits (p. 120).
fig.02-01
Area 1 in the above figure indicates whether the selected kit
contains settings for performance with sticks or for brushes.
To change this setting see “Making settings for brush perfor-
mance” (p. 79). Area 2 indicates effect on/off settings for the
entire kit. Please refer to “Effect switches for the entire kit”
(p. 79). Area 3 will appear if a card is inserted into the TD-10.
If the card’s protect switch is on, a lock symbol will appear.
* To prevent data from being accidentally modified while you
play, it is a good idea to select this display page once you have
finished making settings.
Selecting kits from the list
display
Here you can select drum kits by accessing the full list of
available kits.
fig.02-02
Procedure
1.
Press [KIT]-[F1 (LIST)].
The “DRUM KIT LIST” page will appear.
2.
Use the VALUE dial, [INC/DEC], or [CURSOR] to select a
kit.
Function buttons
[F1 (PAGE <)]:
The previous page of the list will appear.
[F2 (PAGE >)]:
The next page of the list will appear.
Naming a kit
Each kit can be given a name of up to 8 characters.
fig.03-01
Procedure
1.
Press [KIT]-[F2 (FUNC)]-[F4 (NAME)].
The “DRUM KIT NAME” page will appear.
2.
Use the left/right [CURSOR] buttons to select the charac-
ter that you wish to change.
The character at the blinking location is the one that can be
changed.
3.
Use the VALUE dial, [INC/DEC], or [CURSOR] (up/down)
to change the character.
Characters can be selected in the order of the small charac-
ters displayed in the bottom of the screen.
Function buttons
In this page the [F1]–[F4] buttons can be used to perform the
following convenient functions for entering characters.
[F1 (INSERT)]: All characters to the right of the cursor will
be moved to the right.
[F2 (DELETE)]: The character at the cursor location will be
deleted, and all characters to the right of the
cursor will be moved to the left.
[F3 (SPACE)]: A blank space will be inserted at the cursor
location.
[F4 (CHAR)]:
Cycle between uppercase/lowercase/sym-
bols.
2
1
3
Chapter 2. Settings for the entire drum kit
78
Summary of Contents for V-DRUMS TD-10
Page 21: ...Quick Start Quick Start 21...
Page 131: ...Appendices Appendices 131...
