Here is where you can virtually change the acoustics of the
room in which you are playing the drums. The parameters
available here let you select actual room sizes and wall mate-
rials to easily get your desired sound. You can also change
the positions of the “room” microphones.
An easy way to understand this is to change the type of stu-
dio as explained below in “Selecting the studio/room” in
“Settings for the entire drum kit.”
Settings for the entire
drum kit
■
Selecting the studio/room
You can select one of 10 types of “ambiences” built into the
TD-10. Before you make detailed settings, use this setting to
select the basic type of acoustic environment in which you
will be playing.
fig.00-102a
Procedure
1.
Press [STUDIO].
The “STUDIO” page will appear.
2.
Use [INC/DEC] or the VALUE dial to make the setting.
Parameters
Studio Select: Beach, Living Room, Bath Room, Studio,
Garage, Locker Room, Theater, Cave,
Gymnasium, Dome Stadium
■
Changing the size of the room
You have five sizes to choose from.
fig.05-02
Procedure
1.
Press [STUDIO]-[F2 (ROOM)].
The “ROOM” page will appear.
2.
Use [CURSOR] to move the cursor to “Room Size.”
3.
Use [INC/DEC] or the VALUE dial to make the setting.
Parameters
Room Sizes: Tiny, Small, Medium, Large, Huge
■
Changing the wall material
You can choose from Wood, Plaster or Glass covered walls
for the room where the drums are being played.
fig.05-03
Procedure
1.
Press [STUDIO]-[F2 (ROOM)].
The “ROOM” page will appear.
2.
Use [CURSOR] to move the cursor to “Wall Type.”
3.
Use [INC/DEC] or the VALUE dial to make the setting.
Parameters
Wall Type: Wood, Plaster, Glass
Wood: Simulates the sound of a wood-walled room pro-
ducing a warm sound.
Plaster: Simulates a plaster-walled room producing a more
“naturally live” sound.
Glass:
Simulates a glass-walled room producing a very
bright ambience.
■
Selecting the ambience mike
location
Ambience microphones are placed at a distance from the
instrument in order to pick up the natural acoustics of the
room. Adjusting the height of these mikes allows you to cap-
ture different characteristics of that room.
fig.05-04
Procedure
1.
Press [STUDIO]-[F3 (AMBMIC)].
The “AMBIENCE MIC” page will appear.
2.
Use [INC/DEC] or the VALUE dial to make the setting.
Chapter 4. Studio settings
87
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10
Summary of Contents for V-DRUMS TD-10
Page 21: ...Quick Start Quick Start 21...
Page 131: ...Appendices Appendices 131...
