12
1.
Remove the wing nut, felt, collar, and washer
included with the cymbal mount.
2.
Use the drum key supplied with the VH-11 to
tighten the stopper bolt.
The stopper keeps the CY-12R/C from turning, and prevents
the cables from catching or getting tangle on the stand.
3.
Attach the CY-12R/C so the unit is oriented as
shown in the diagram (bolt should be opposite the
output jacks).
4.
Tighten the wing nut to obtain the desired
movement.
Use the included felt washer and the wing nut.
• Double sounding may occur if the wing nut is loose.
• Do not use the washer or felt included with the cymbal
mount.
CY-12R/C
(V-Cymbal Ride/Crash)
Bell
Bow
Edge
Wing Nut
Felt Washer
Stopper
BOW/EDGE
Output Jack
BOW/BELL
Output Jack
Attaching the V-Cymbal to the Cymbal
Mount
Stopper
(Be sure to orient
it correctly)
Tighten the bolt
with a drum key
Wing Nut
Felt Washer
TD-12KX_e.fm 12 ページ ２００９年１１月１０日 火曜日 午後１２時６分
