13
Using the built-in connection cables of the MDS-12X, connect the pads, cymbals, hi-hat, and kick trigger pad.
921
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all
devices before making any connections.
fig.Setting1.e
• The HI-HAT and RIDE cymbal use two cables each.
See the TD-12 Owner’s Manual (p. 20 and p. 52).
• Adjust the VH-11’s offset.
See the VH-11 Owner’s Manual (p. 6).
* Do not pull or stretch the cables too tight.
Connecting the Pads and the Cymbals
T1
T2
PD-85
PD-85
T3
RD
(BOW/BELL)
RDE
(BOW/EDGE)
CY-12R/C
CY-12R/C
CY-12R/C
CR1
(BOW/EDGE)
CY-12R/C
CY-12R/C
CR2
(BOW/EDGE)
CY-12R/C
CY-12R/C
KIK
KD-120
SNR
PD-105
PD-105
TD-12
VH-11
VH-11
KIK
SNR
T1
T2
T3
HH
HHC
CR1
CR2
RD
RDE
AX1
AX2
HH
(TRIGGER OUT)
HHC
(CONTROL OUT)
TD-12 Rear Panel
* When connecting the cables, please refer to the marking
labels that are attached to both ends of the cables.
TD-12KX_e.fm 13 ページ ２００９年１１月１０日 火曜日 午後１２時６分
