12
KIT EDIT
POST EQ
This is a three-band equalizer.
Parameter
Value
Explanation
Low Frequency
20Hz–16kHz
Center frequency of the low range
Low Gain
-40.0–+15.0dB
Amount of low-range boost/cut
Mid Frequency
20Hz–16kHz
Center frequency of the middle range
Mid Q
0.5–8.0
Adjusts the width of the frequency band. Higher values make the width narrower.
Mid Gain
-40.0–+15.0dB
Amount of mid-range boost/cut
High Frequency
20Hz–16kHz
Center frequency of the high range
High Gain
-40.0–+15.0dB
Amount of high-range boost/cut
TOTAL COMP
This is a compressor applied at the last stage of the overhead sound.
Parameter
Value
Explanation
Post Comp Switch
OFF, ON
Turns the total comp on/off.
Gain
-24.0–+24.0dB
Output volume of the total comp
Threshold
-60–0dB
Volume level at which compression begins
Ratio
1:1–100:1
Compression ratio
Knee
HARD, SOFT1–3
Attack of the sound at the moment compression is applied
Attack
0.1–100mSec
Time from when the volume goes up the threshold level until the compressor effect applies
Release
10–1000mSec
Time from when the volume falls below the threshold level until the compressor effect no longer
applies