background image

25

CLICK

You can sound a click and practice drumming at a steady tempo.

Parameter

Value

Explanation

[F2] button (TEMPO tab)

Tempo *1

20–260

Tempo

Beat *1

1–9

Number of beats per measure

Rhythm

 – 

Interval of the click

[F3] button (SETUP tab)

Beat *1

1–9

Number of beats per measure

Rhythm Type

 – 

Interval of the click

Sound

METRONOME, CLICK, VOICE, BEEP 1, 

BEEP 2, TEK CLICK, STICKS, CLAVES, 

WOOD BLOCK, COWBELL, AGOGO, 

TRIANGLE, TAMBOURINE, MARACAS, 

CABASA

Sound for the click

Pan

L30–CTR (CENTER) –R30

Stereo position of the click

Level

-INF–+6.0dB

Volume of click

LED Reference

OFF, ON

Specifies whether the [CLICK] button blinks in time with the click (ON) or does not blink (OFF).

[F4] button (TAP tab)

Tap Sw

OFF, ON

You can specify the tempo by striking the pad specified by Tap Pad or by pressing a button 

(Tap Tempo).

Tap Pad

KICK–AUX3 (RIM)

Select the pad or button that can be struck or pressed to set the tap tempo.

*1 This cannot be changed while playing back a drum performance data song (p. 56) or recorded data.

Summary of Contents for V-Drums TD-27



























































Reviews: