44
Multi-Effect Parameters
OD
0
DELAY
Parameter
Value
Explanation
Overdrive
Drive
0–127
Degree of distortion
Also changes the volume.
Overdrive Pan
L64–R63
Stereo location of the overdrive sound
Tempo Sync
OFF, ON
Specifies whether the delay time value of
the delay is specified as a note value (ON) or
not (OFF).
Delay Time
1–2600msec, note Adjusts the delay time from the direct sound
until the delay sound is heard.
Delay
Feedback
-98–+98%
Adjusts the proportion of the delay sound
that is fed back into the effect. Negative “-”
settings will invert the phase.
Delay HF
Damp
200–8000Hz,
BYPASS
Adjusts the frequency above which sound
fed back to the effect will be cut. If you do
not want to cut the high frequencies, set this
parameter to BYPASS.
Delay Balance
D100:0W–
D0:100W
Adjusts the volume balance between the
sound that is sent through the delay (W)
and the sound that is not sent through the
delay (D).
Level
0–127
Output Level
DS
0
DELAY
The parameters are essentially the same as in “OD
0
DELAY” with the
exception of the following two.
Overdrive Drive
0
Distortion Drive, Overdrive Pan
0
Distortion Pan
CHORUS
This is a stereo chorus. A filter is provided so that you can adjust the
timbre of the chorus sound.
Parameter
Value
Explanation
Filter Type
OFF, LPF, HPF
Type of filter
OFF:
no filter is used
LPF:
cuts the frequency range above the
Cutoff Freq
HPF:
cuts the frequency range below the
Cutoff Freq
Cutoff Freq
200–8000Hz
Specifies the frequency at which the filter
cuts a specific frequency region
Pre Delay
0.0–100.0ms
Adjusts the delay time from the direct sound
until the chorus sound is heard.
Tempo Sync
OFF, ON
Specifies whether the modulation rate is
specified as a note value (ON) or not (OFF).
Rate
0.05–10.00Hz,
note
Frequency of modulation
Depth
0–127
Depth of modulation
Phase
0–180deg
Spatial spread of the sound
Low Gain
-15–+15dB
Gain of the low range
High Gain
-15–+15dB
Gain of the high range
Level
0–127
Output Level
SPACE-D
This is a multiple chorus that applies two-phase modulation in stereo.
It gives no impression of modulation, but produces a transparent
chorus effect.
Parameter
Value
Explanation
Pre Delay
0.0–100.0ms
Adjusts the delay time from the direct sound
until the chorus sound is heard.
Tempo Sync
OFF, ON
Specifies whether the modulation rate is
specified as a note value (ON) or not (OFF).
Rate
0.05–10.00Hz,
note
Frequency of modulation
Depth
0–127
Depth of modulation
Phase
0–180deg
Spatial spread of the sound
Low Gain
-15–+15dB
Gain of the low range
High Gain
-15–+15dB
Gain of the high range
Level
0–127
Output Level
OD
0
CHORUS
Parameter
Value
Explanation
Overdrive
Drive
0–127
Degree of distortion
Also changes the volume.
Overdrive Pan
L64–R63
Stereo location of the overdrive sound
Chorus Pre
Delay
0.0–100.0ms
Adjusts the delay time from the direct sound
until the chorus sound is heard.
Tempo Sync
OFF, ON
Specifies whether the modulation rate is
specified as a note value (ON) or not (OFF).
Rate
0.05–10.00Hz,
note
Frequency of modulation
Chorus Depth
0–127
Depth of modulation
Chorus
Balance
D100:0W–
D0:100W
Adjusts the volume balance between the
sound that is sent through the chorus (W)
and the sound that is not sent through the
chorus (D).
Level
0–127
Output Level
DS
0
CHORUS
The parameters are essentially the same as in “OD
0
CHORUS” with
the exception of the following two.
Overdrive Drive
0
Distortion Drive, Overdrive Pan
0
Distortion Pan
