Roland V-Drums TD-3KV Owner'S Manual Download

Page: 11 / 16

USING THE UNIT SAFELY

fig.FD-8.e

• The tips of the anchor bolts are sharp. Handle with care.

• When using on flooring, the anchor bolts may damage

the floor. Do not attach the anchor bolts.

• When the FD-8 is not going to be used for a long period

of time, move and fix the arm, allowing longer travel for
the pedal.

• To avoid damage, do not leave the FD-8 for extended

periods of time with the pedal plate depressed.

Using the FD-8, you can control the opening and closing of the
hi-hat sound.

Open Hi-Hat

Strike the hi-hat without pressing the pedal

Half Open Hi-Hat

Strike the hi-hat with the pedal pressed half-way

Closed Hi-Hat

Strike the hi-hat with the pedal pressed

Foot Closed

Completely press down the pedal

The volume of the Foot Closed sound can be adjusted
separately (TD-3 Owner’s Manual; p. 42).

• Connect the FD-8 to the TD-3 before turning on the

power.

• Do NOT press the pedal when turning on the power.

FD-8:

Hi-Hat Control Pedal

Dimensions:

130 (W) x 396 (D) x 103 (H) mm

5-1/8 (W) x 15-5/8 (D) x 4-1/16 (H) inches

Weight:

1.3 kg / 2 lbs 14 oz

Accessories:

Tuning Key

FD-8

(Hi-Hat Control Pedal)

Anchor Bolt

Pedal Plate

Control Out Jack

shallow

deep

Shift the Arm

Adjusting the Travel of the Pedal

Attaching the Anchor Bolts (When Using on the Carpet)

Anchor Bolt

Spring for
the Anchor Bolt

Loosen the nut with the included tuning key.
After adjusting, tighten the nut.

Using the FD-8

Specifications

TD-3KV_e 11 ページ２００４年１２月１６日　木曜日　午後３時４３分

Summary of Contents for V-Drums TD-3KV

















Search results

Summary of Contents for V-Drums TD-3KV

Reviews:

Related manuals for V-Drums TD-3KV

Brands by name

Popular brands

Roland V-Drums TD-3KV, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-3KV

Reviews:

Related manuals for V-Drums TD-3KV

Brands by name

Popular brands