14
USING THE UNIT SAFELY
.
921
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Using the provided cables, connect the pads, cymbal pads, hi-hat control pedal, and kick trigger.
fig.Setting1.e
fig.Label
1.
Insert the plugs of connecting cables into the TRIGGER INPUT jacks on the rear
of the TD-3.
2.
Insert the other plugs (opposite ends) into the TRIGGER OUTPUT jacks of the
pads.
* When you connect the cables, please refer to the labels that are attached to both ends of the cables.
* Set the trigger type for trigger input SNARE to “
” (TD-3 Owner’s Manual; p. 50).
Assemble the “TD-3KV”
(HHC)
(KIK)
(T1)
(T2)
(T3)
(RD)
(CR1)
(SNR)
(HH)
TRIGGER INPUT jacks
SNR
TD-3KV_e 14 ページ ２００４年１２月１６日 木曜日 午後３時４３分
